Healthstream FAN BIKE, Owner'S Manual

Page: 8 / 24

7
WARNING: The SMALL CRANKS (44) require a special tool to remove once assembled. Read all
of the following ASSEMBLY INSTRUCTIONS before attaching the SMALL CRANKS (44).
NOTE: 1. Align the ARROW MARK on the SMALL CRANK (44) with the WHITE MARK on the
AXLE (9) when installing the two SMALL CRANKS (44) onto the AXLE (9). Refer to inset drawing
A.
NOTE: 2. The RIGHT FLANGE NUT (M10x1.25)(47), black color, has right hand threads and is
tightened by turning clockwise. The LEFT FLANGE NUT (M10x1.25)(46), brass color, has left hand
threads and is tightened by turning counterclockwise.
NOTE: 3 .There is an “L” decal on the LEFT CRANK(53), and an “R” decal on the RIGHT
CRANK(54).
STEP 5
To assemble the RIGHT CRANK (54), install the SMALL CRANK (44) onto the AXLE (9) with
LOCK WASHER (M10)(45) and RIGHT FLANGE NUT (M10x1.25)(47). Insert an Allen wrench
through the hole in the socket wrench to be the handle. SECURELY TIGHTEN the RIGHT
FLANGE NUT (M10x1.25) (47) with the socket wrench. Push the CRANK CAP(48) into the SMALL
CRANK(44).
CAUTION: It is possible to assemble the LEFT CRANK (53) and the RIGHT CRANK (54) the
wrong way shown in inset drawings B and C. The SMALL CRANK (44) on the LEFT CRANK (53)
must be assembled the opposite direction from the right side. Refer to the below illustration. Use
the same procedure as above to assemble the LEFT CRANK (53).