11
SET UP INSTRUCTIONS
Place the Fan bike in the area where it will be used. It is recommended that the Fan bike be placed on an
equipment mat. The Fan bike is approximately 48 inches long x 24.6 inches wide x 52 inches tall. An area 4
feet wide x 6 feet long is required for safe operation of the Fan bike. Make sure that adequate space is
available for access to and passage around the Fan bike.
LEVELING:
Adjust the LEVELING CAPS (73) on the REAR STABILIZER (2) so that the Fan bike
sits on the floor without rocking.
MOVING: The Fan bike has a pair of WHEELS (76) on the FRONT STABILIZER (3). Lift up the
REAR STABILIZER (2) to move the Fan bike.
FUNCTIONAL INSPECTION:
Visually inspect the Fan bike to verify that assembly is as shown in the above illustration. Check the function
of the Fan bike by turning the crank slowly through one complete revolution to verify that the drive train
functions properly.
STORAGE:
1. To store the Fan bike, simply keep it in a clean dry place.
2. The Fan bike is approximately 48” long x 24.6” wide x 52” tall. These dimensions may vary. Please
measure your Fan bike if exact dimensions are needed.
3. To move the Air 525, lift the REAR STABILIZER (2) and use the wheels (76) on the FRONT
STABILIZER(3).
4. To avoid damage to the electronics, remove the batteries before storing the Fan bike for one year or
more.
Summary of Contents for FAN BIKE
Page 5: ...4 HARDWARE PACKING LIST y...
Page 15: ...14 EXPLODED DIAGRAM...
