8
MAINTENANCE
Maintenance
The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting of your scale. Maintenance operations other than those described in this
manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the total scale for any obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking or fraying, or for broken/bent prongs.
3. Do not store the scale on its side.
4. This scale contains electronic parts. Use it carefully. Do not drop, kick or jump on it.
5. Do not store near chemicals, heaters or radiators.
Note:
This scale is an extremely sensitive weighing device. If the auto-off function is disabled,
battery power will be consumed. Items such as clothing or towels place or dropped on the scale
may cause it to activate. To prevent run down of the batteries, do not store or leave anything on
the scale.
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.
1. Clean all external surfaces with a clean damp cloth. Mild antimicrobial soap and water
solution may be used. Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solutions.
3. Do not use abrasive cleaners. Do not use Isopropyl Alcohol or other solutions or sanitizing
wipes to clean the display surface.
4. Do not spray the scale with liquid. Never place the scale in water.
Replacement Parts
Parts are available if a piece of the scale needs to be replaced. Contact Health o meter
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of these
replacement parts.
Part #
Description
ADPT30
POWER ADAPTER
1500004001
MEASURING TAPE
1590066001
GRAY PADS ON FEET
