- 2 -
3.
How to Setup the unit
1.
Install the module and sensor
as per the supplied Install Guide.
2.
Install the
QuickShifter easy
(iQSE) free app
on your device.
In the
App Store
or
Play Store
, search for
HealTech
to find the app.
3.
Turn the ignition key ON
.
The iQSE LED light should light up in GREEN color then change to solid RED.
This confirms that the unit has power and ready for use.
If the LED turns off in a short while or does not light up, you need to have
the engine running to establish the Bluetooth connection.
4.
Open the iQSE app
and
connect to the module from the app
as
instructed. The pairing code is always
4325
for the iQSE.
5.
Start the Setup Wizard
in the app and follow the instructions on the
screen.
6.
Take a test ride and fine-tune the settings. For information about the setup
parameters, refer to the help texts you see in the iQSE app at the bottom of
each menu screens.
4.
How to use the QuickShifter
-
You may do clutchless upshifts only during acceleration, i.e. at partial to full
throttle, well above idle speed.
-
Always use the clutch under these conditions:
selecting first gear
finding neutral
shifting to 2
nd
gear if it’s not smooth without clutch on your bike
during deceleration/braking
when hitting the rev limiter
when the engine does not pull
-
You may do clutchless downshifts with partial throttle from the higher (4-6)
gears only if the shifts are smooth and effortless on your bike and the shift
lever is not stiff. Otherwise, use the clutch for downshifts.
-
Be sure you always do quick, confident and complete shift movements with
your foot, until the lever stops. Adjust the shift lever position if necessary to
ensure effortless and complete shift movement with your foot.
When the power is cut, there's a limited time (typically less than 90ms)
while the gearbox is being unloaded and clutchless shift is possible. After
this time the gearbox is loaded again due to engine braking. If you change
the gear slowly, you may hit false neutral or you can't make the shift at all.
-
If the shifts are not smooth, do not stress your gearbox. Use the clutch until
you make the necessary changes.
