17
Take the filter core out and washed with flowing pure water or brush. Pay attention to the seal o-ring
which should be attached to the filter.
After cleaning, put the filter core to the original place and tighten the lid. Ensure that the core and
seal o-ring in the lid.
Once the filter core is corroded, please replace the pre-filter. How to installation, you can refer to
Chapter 4
6.3.2 Into the maintenance settings
Make sure that the system is in standby or automatic making water state. If it is in flushing or
dispense state, please press “Stop/
”to stop it.
Press “Menu” keypad to enter the menu model.
语言
LANGUAGE
ENGLISH
中文
Press “Disp./▲” or “Flush/▼” keypad to choose “ENGLISH”, then press “Stop/
” keypad to confirm
and into the code input interface.
Password: 85
Press or hold down “Disp./▲”or “Flush/▼”keypad, and then input the correct password. The default
password is 85, press “Stop/
” to confirm to enter the next level of menu.
If the password is error, the system will restart.
Parameter
setting
Service
setting
Press or hold down “Disp./▲”“Flush/▼” keypad to choose “Service setting”. Then press “Stop/
”
keypad to confirm to enter the parameter setting menu.
When you enter the service setting menu, you can find the contents for each setting, which include
cartridge replace, disinfection settings, data logging, machine condition and the factory setting.
Cartridge
Cartridge replace
replace
Cartridge
Cartridge
replace
replace
Disinfect
Disinfect
Date
Date
recorder
recorder
System
System
display
display
Manu.
Manu.
setting
setting
Obligate
Obligate
level
level
6.3.3 Pre-treatment replacement
