14
system shows the alarm message “Ds light” if the adjusted limit will be overstepped (manufacture’s
setting is 90%). press “Disp./▲
，
Flush/▼”keypad to increases or decreases the value, press the Stop/
”
keypad to confirm the setting and switches to the next menu level.
This value should not be set too low, otherwise the pure water quality will be affected. If the quality
of inlet water is too poor, Please set high value for higher pure water requirement. Value setting range:
50 to 99.
5.6.2 Calendar setting
After entering the parameter setting menu, press “Disp./▲” or “Flush/▼”keypad to select the
"Calendar" function.
Calender
Calender
Alarm
Alarm
setting
setting
Calender
Calender
Prod.
Prod.
unit
unit
Volume
Volume
of
of water
water
Prod.
Prod.
Resis.
Resis.
Disp.
Disp.
flow
flow
In this menu level the user want to change the timer in maim system ,you can be press the
“Disp./▲
，
Flush/▼”keypad to set the correct date and time according to the mention of the display. Press
the “Stop /
” keypad to confirms the setting and switches to the next menu level.
Year
Year
Month
Month
9
Hour
Hour
12
12
Minute
Minute
30
30
Date
Date
20
20
2016
2016
Year
Year
2016
2016
5.6.3 Volume of taking product water setting
After entering the parameter setting menu , press “Disp./▲” or “Flush/▼”keypad to select the
"Volume of water" function.
Volume
Volume of
of water
water
Alarm
Alarm
setting
setting
Calender
Calender
Prod.
Prod.
unit
unit
Volume
Volume
of
of water
water
Prod.
Prod.
Resis.
Resis.
Disp.
Disp.
flow
flow
Press "Stop /
" keypad to enter the volume of taking water setting interface.
Alarm
Alarm
setting
setting
Calender
Calender
Prod.
Prod.
unit
unit
Volume
Volume
of
of water
water
Prod.
Prod.
Resis.
Resis.
Disp.
Disp.
flow
flow
Volume:
Volume:
OFF
OFF
In this menu level the user can be adjusted fixed quantity of take water from 0.1L to 25L, or No
limit(off) , the manufacture setting is No limit(OFF), the user can press “Disp./▲
，
Flush/▼” keypad to
adjusting according to the user desire. Press the “Stop/
” keypad to confirms the setting and switches to
the next menu level
5.6.4 Dispensing flow setting
By setting this parameter, user can calibration the accuracy of fixed quantity of taking water such as
1L or 5L.
After entering the parameter setting menu ,Press the “Disp./▲”or “Flush/▼”keypad to select the
"Dispense flow" function.
Dispensing
Dispensing flow
flow
Alarm
Alarm
setting
setting
Calender
Calender
Prod.
Prod.
unit
unit
Volume
Volume
of
of water
water
Prod.
Prod.
Resis.
Resis.
Disp.
Disp.
flow
flow
Press the “Stop/
” keypad to confirms the setting and switches to the next menu level.
