If you are installing PCIE expansion card, install the M.2 key to PCIEx4 riser. Please also install the
SATA power cable and SATA data cable as M.2 SSD is disabled in this case. Install the PCIE card to
the H1 Thin ITX backplate before installing this backplate to the H1 two side panels.
Install NUC motherboard using four
A
M3x6mm from H1 installation kit to the four copper stud with
NUC CPU facing upwards.
Install HDPLEX Thin ITX backplate to the H1 two side panel using four M5 CUP Head HEX screws
from H1 package.
Install H1 PC case PWR cable to the 2.54mm-2mm adapter. Plug the USB 3.0 into either one of the
NUC front USB 3.0 port and install USB 3.0 ear to the I/O plate using two M3*8mm from H1
installation kit. Plug 3.5mm jack to the NUC front audio port and lock the other end on the H1 side
panel. Install HDPLEX internal 80WAC/200WAC to H1 bottom plate and connect its
19
VDC output to
the 6PIN-5.5/2.5mm DC jack cable.
