Page
24
of
34
Install three 10mm copper posts
E
to the right side panel. Install the side I/O
PCB to the copper posts using three nylon screws
E
.
Install the left side panel to the H5 base plate using two M4*8 Flat Head HEX
Screws
C
.
Attached the motherboard I/O shield plate to the H5 back plate and install the
back plate to the chassis using four M5*8 CUP Head HEX Screw
B
.
Lock the half height card, using one M3*5 Round Head Screw with Cushion
A
to
the 3/4 M3 thread hole.