Page
23
of
34
If you are using a 7.4*5.0 or 5.5*2.5 DC connector, please install the DC
Adapter Plate using two M3*5 Round Head Screws with Cushions
A
.
The HDPLEX ATX Modular Bridge Input Board is included with the 300W ATX
linear PSU, or available for purchase separately. Install four 4mm copper post
(included with the ATX Modular board) onto the H5 back plate, then install the
ATX modular bridge board to the posts using four M3*5 Round Head Screws with
Cushions
A
.
Verify orientation of the ATX Modular bridge board, as it will cause conflict with
the side panel if incorrectly installed.
