background image

                

                                         

 

 

Operating Instructions

 

 
Setup HDMI TX and HDMI RX   

 

A HTTP server is embedded in each TX and RX. you can setup IP address for HDMI extender via web 
browser.  
The default IP address of the 

TX is 192.168.168.55,    MAC address is: 00:0b:78:00:60:01.   

The default IP address of the 

RX is

 

192.168.168.56,  MAC address is: 00:0b:78:00:60:02.   

 
Step 1:

 Assign the PC (or laptop) IP address on the computer : “Control Panel”

” Network 

Connections”

“Local Area Connections Status”

“Properties”

“Internet Protocol (TCP/IP)”, Type the IP 

address field with 192.168.168.11 (0-255) and Subnet mask with 255.255.255.0.  After that press OK to save 
the configuration.   
Note: The IP address of PC should be different from the IP address of TX and RX. 
 

Step 2:

 Use an Ethernet Cable to connect the PC (or laptop) and the extender. the power LED for the extender 

is red and the status LED becomes green. 
 

Step 3:

 please Ping the connected device through the sequence on computer: “Start”

 “Run”

 input 

“CMD”

 input “ping 192.168.168.55” for TX or input “ping 192.168.168.56” for RX, you will receive the reply if 

the connection is established.   

 

Step 4:

 Login in IE :192.168.168.55 (default IP for TX) or 192.168.168.56(default IP for RX), You can setup IP 

address, subnet mask, gateway, and MAC address for the TX and RX. 
Please set IP address for each TX and each RX, IP:192.168.168.XX (XX:1-255. all IP address for TX and RX 
must be different .   
Please set MAC address for TX and RX, MAC:00:0b:78:XX:XX-XX (XX:01-FF), The MAC address for each TX 
and each RX must be different .         
 

Step 5:

 After click “Apply” button, the green LED light on the device will go out, you have successfully set IP 

address for TX and RX now. 
Note: if you need to restore the device to it’s factory default settings, please power on the device, the red light 
becomes lighting, waiting about 10 seconds, the green LED light starts working, at this time to press the reset 
button about 5-10 seconds, then the green light will go out, you have successfully restored IP address to 
factory IP address now.

     

 

 

 

 

 

 

 

 

 

 

9

 

Summary of Contents for SX-EP22












Reviews: