4x4 HDMI 2.0 HDBaseT Matrix Switcher
36
IR:
HDMI:
HDBaseT:
7.2.2 Control Local Input Device from Remote
The same basic principle applies when controlling the local input device from the
remote location.
⚫
Control local input device through IR OUT port
Example: Switch HDMI input 3 to HDBaseT output 4.
Connect an IR receiver to
IR IN
port on the receiver, then connect an IR emitter to the
IR OUT 3
on the matrix switcher. The third input source can be controlled through its
corresponding IR output port. The connection diagram shown as below:
Display
AUDI O MATRIX OUT / ARC
IR E YE
IR Emitter
HDCP LINK
Tx Rx
4K Blu-Ray
Receiver
IR Receiver Remote
