26
In “Network Setup” menu,user can press UP/DOWN to
move highlight and press OK to open a new window like
Network local setting and Twin Protocal setting.
6.1. Network Set up
When enter into “Network Local Setting” menu, the
system will show a menu as below.
User can check the IP Address, Subnet Mask,
Gateway, DNS Primary and DNS Secondary informations in
this window. Press Left/Right can switch “DHCP” ON/OFF
when the highlight is on “DHCP”.
When “DHCP” is ON, the STB will load all the network
settings automatically. If the loaded net work setting is not
correct, user need to switch OFF the “DHCP” and input the
settings by hand.
After finished all the settings, user need to move the
highlight to “Apply” and press OK to apply all the new settings.
Before the new setting to be applied, the STB will show a
dialogue “Apply Network Local setting?”. User can choose YES
to apply the new sttings or choose NO to exit from the dialogue
without applying any new settings.
Press EXIT to exit from current menu.
6.2. Cccam Client Setup
When enter into “Cccam Client Setup” menu, the
system will show a menu as below.
In “Update Files By USB”, user can load the C-line into
the STB. When enter into “Update Files By USB” there will
show a window “Add update Files”, as below.
In“Add update Files” window, user need to choose the
format of their C-line (Option: Cccam.cfg, constant.cw.) then
press the yellow key to start to read the C-line from connected
U-disk.If use don’t want to load C-line, press Blue key/EXIT to
cancel the operation/exit from the current window.
Q&A
Q1: Why the STB cann’t read anything when
start to read?
A 1: pls check whether U-disk has been connected to the
STB
A 2: check to see whther user has copied the C-line into
the U-disk
A 3: check to see whether the format of C-line is correct
In“ManageConfigFiles”, user can check the loaded C-line.
In “Manage Config Files”, user need to choose the C-line
format, then STB will show you the C-line which has been
already load into the STB.
*If use didn’t load any C-line into STB, there will show
nothing when user check on “manage Config Files”.
Press blue key/EXIT to exit from current window.
If use don’t like to load C-line from U-disk, he/she can
add the C-line manually. User need to input the informations
like Protocol type, Host/Port/User name/Password of the C-line.
Summary of Contents for DVB-S2
Page 1: ...1 DVB S2 High Definition Set Top Box ...
Page 9: ...9 RemoteController ...
