HD Radio HDS100, User Manual

Page: 8 / 28

Operation Control & Function
8
English
■
■
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
Description Function
HDMI2-IN
AV-IN
IR-OUT
PC AUDIO-IN
2
3
4
5
HDMI 2 input port (correspond to ‘HDMI2’ on the remote control)
HDMI1-IN 1
HDMI 1 input port (correspond to ‘HDMI1’ on the remote control)
Composite or SCART input port (correspond to ‘AV’ on remote control)
PC-IN 6
Support component input through component gender.
It will be used for the following feature
Stereo Audio input port
DC 8
Power input port
Connect IR Flasher to control external devices which are connected to the
transmitter.
LAN 7
Power and
Source Button
Description Function
1
IR window
2
IR receiving window from remote control.
AV
3
4 PC
HDMI2
5
It will be on when the HDMI2 port is selected for the video input.
If the cable is not connected or video signal is not fed into properly, LED will blink.
6
HDMI1
It will be on when the HDMI1 port is selected for the video input.
If the cable is not connected or video signal is not fed into properly, LED will blink.
7
Power/Link LED
○
○
Press it shortly to turn the power on.
When power on,
-
-
Press shortly : Press to select the video input source. Each press the power
button will cycle through the available video input "HDMI1
→
MHMI2
→
PC
→
AV
→
HDMI1" in sequence.
Press longer : Press and hold more than 3 seconds to turn the power off.
○
○
○
Connection to PLC modem
Direct connection to LAN cable
Connection to PC for the system configuration setting
Transmitter Front
Transmitter Rear
It will be on when the AV-IN port (Composite or Scart) is selected for the video
input.
It will be on when the PC-IN port is selected for the video input.
If the cable is not connected or video signal is not fed into properly, LED will blink.
○
○
○
Blink : System booting or establishing link between the transmitter and the receiver.
Quick Blink : Software upgrading or wireless/LAN mode switching.
On : Finish of link establishment is completed between the transmitter and the
receiver.