HD Radio HDS100, User Manual

Page: 10 / 28

Operation Control & Function
10
English
1 2
5
4
3
6 8
7
■
Remote control
Description
Function
Display the current resolution, input / output ports, channel, WiFi reception (1/5~5/5). (5/5 strongest, 1/5 weakest)
It appears when you press and disappears automatically after around 20 seconds.
Note1. If the power is off abnormally, the user's configuration may not be saved.
Note 1.
Note 2.
Note 3.
Note 4.
⑥ ~ ⑧ are functioned HD-W100 model only.
⑥
~
⑧
are applied only when you press the button more than 5 seconds. On the normal link stage, if you change either TX or RX both device
will be changed simultaneously.
Otherwise you should change on TX and RX separately. (Info screen appears on the display for 3 seconds if it changes appropriately.
It will be rebooting when you change for
⑥
~
⑧
. Power/Link LED will blink in a short time and reboot.
Link may be interfered caused by wrong setting or malfunction of
⑥
~
⑧
button. In this case, please select desired communication mode
(LAN/WiFi) or channel to each transmitter and receiver using remote control.
INFO 2
AUDIO IN 5
VIDEO OUT 3
VIDEO IN 4
Select VIDEO input port on the transmitter (HDMI1, HDMI2, PC, AV)
Select VIDEO output port of the receiver (HDMI, COMPO , AV)
LAN(Red) 6
WiFi Ch1(Green) 7
WiFi Ch2(Yellow) 8
Select WiFi (Wireless) mode, Ch2.
* TX : Transmitter, RX : Receiver
Select WiFi (Wireless) mode, Ch1.
Select LAN (Cable) mode.
POWER 1
○
○
○
Power on :
- If you turn on TX or RX when power/Link LED is on , both devices will be power-on simultaneously within 10 seconds.
- You have to turn on each of TX and RX separately when power/Link LED is off, it may takes around 1 min 30 seconds for booting up.
Power off (press shortly) : When you turn off TX or RX, both devices will be power-off simultaneously and only power LED will be on.
Power off (press more than 4 sec) : When you turn off TX or RX, both devices will be power-off simultaneously, and LED will be off.
Power will be completely turned off.
To turn the power on/off of transmitter and receiver.
Select AUDIO input port on the transmitter (HDMI1, HDMI2, PC, AV)
Audio port is selected same with video port as a default. But you can select particular audio port using this button.