HD Radio HDS100, User Manual

Page: 21 / 28

21
English
1)
2)
3)
4)
5)
To download up-to-dated software
visit www.hdflow.com
Store this S/W in "root directory" of USB Dongle Drive.
Plug USB Dongle Drive into the USB port of the receiver.
With LEDs blinking, the receiver and the transmitter will be upgraded in sequence.
(It takes around 5 minutes)
When the upgrade is completed, the product will reboot.
■
Software upgrade
a.
b.
c.
d.
Update is available only when the transmitter and the receiver operate normally.
NEVER remove the power during update.
During the update, screen does not display the video.
When the product reboots again, you can remove the USB Dongle Drive.
Important Notice
Interference Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interference that may cause undesired operation
Notice for USA:
This equipment has been tested and found to comply with the limits for a Class B digital device., pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
correct the interference by one of the following measures:
1. Relocate the receiving antenna.
2. Increase the separation between equipment and receiver
4. Consult the dealer or an experienced radio/TV technician for help.