manualshive.com logo in svg

HCI RoomMate RM20II, Operation Manual

Share
Download
HCI RoomMate RM20II Operation Manual Download Page 53

--------------------------------------------------------------------------------------GEN II OPERATIONS MANUAL 

HealthCare Information, LLC 

53

 

KEY DEFINE  

The functions of the front or side panel buttons can be redefined.  To change the functions

:  

1.

 

Select KEY DEFINE in the SYSTEM menu and press the right arrow button.  

2.

 

Select the button you wish to change.  Not all buttons can be changed.  See diagram for button locations.  Later 
version keypads may be labeled differently but the location is the same.  

3.

 

Use the right and left arrow button to change the function.  

4.

 

Repeat steps 2 and 3 for all buttons you wish to change.  

5.

 

Press the ENTER button when finished.   

MODELS WITH FRONT PANEL KEYPAD.               

MODELS WITH SIDE PANLE KEYPAD ONLY.                           

NOTE:  Keypad mapping is the same regardless of the key label.

Summary of Contents for RoomMate RM20II





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands