HCI RoomMate RM20II, Operation Manual

Page: 14 / 68

--------------------------------------------------------------------------------------GEN II OPERATIONS MANUAL
HealthCare Information, LLC 14
INSTALLATION
Before installing, carefully read the “Important Safeguards” section on page 6.
Do not plug the set in until the rest of the installation is finished.
Use only the included UL listed Hospital Grade Power Cord.
If hanging the set on a wall, make sure the wall mount used is rated to carry the weight of the set.
RM20II 17lbs
RM22II 17.5lbs
RM26II 30lbs
RM32II 36lbs
RM42II 78lbs
RM52II Not available at time of printing.
BASIC CONNECTIONS
Antenna or Cable
Connect the antenna or cable lead to the RF input connector on the inside of the set closest to the
USB port.
Equipment With Composite Audio and Video Outputs
You can connect a device with composite audio/video outputs such as a DVD or VCR player to the
composite input jacks on the left side of the monitor. Connect the video output of the device to the
yellow jack, the right audio output of the device to the white jack and the left video output of the
device to the red jack. Change the source to AV to use the device.
Equipment With Component Audio and Video Outputs
You can connect a device with component audio/video outputs such as a DVD player to the
component input jacks on the backside of the monitor. Connect as follows:
Device Output TV Input
Y Red Y Input Jack
Cb/Pb Blue Cb/Pb Input Jack
Cr/Pr Green Cr/Pb Input Jack
Right Audio Red Component Audio Input Jack
Left Audio White Component Audio Input Jack