211101
10
Vedpak 135_Version 3_11.2015
DK
Safety Information
To ensure that the tester is used safely, Follow these instructions:
• Do not use the multimeter if the tester or testleads appear damaged or if you suspect that
the multimeter is not operating properly.
• Disconnect the live test lead before disconnecting the common test lead.
• When using the test leads, keep your fingers behind the finger guards on the test leads.
• Do not apply more than 600 . rms between a multimeter terminal and earth ground.
• Disconnect the test leads from the object circuit before measuring the voltage. The multimeter
enters scan mode automatically. Then connect the test leads to the voltage. Do not connect the
test leads to the circuit first and then make it switched on before the circuit is powered. If so, the
multimeter will go to the resistance measure function first when it is powered, and it is easy to
be damaged or wrongly operated when the power is suddenly switched on.
• Use caution when working with voltages above 60 V DC or 30 V AC rms. Such voltages pose a
shock hazard.
• The user is cautioned that failure to use this equipment in accordance with the manufacturer’s
instruction may be detrimental to the operation of this equipment and may impair any safe
guards within the equipment.
Service and Parts
This Digital Multimeter should be serviced only by a qualified service technician.
Specifications
• Maximum voltage:
Between any terminal and earth ground 600 V rms.
• Display:
3 ¾-digits, 4000 counts, updates 3/sec.
• Overload indication:
“OL” show on right up of the LCD.
• Use environment:
Temperature 0°C to 40°C, (32 to 104°F), humidity <85% RH.
• Storage environment:
Temperature -20°C to 60°C (-4 to 140°F), humidity <95% RH.
• Altitude:
Operating under 2000 m, Storage under 10.000 m.
• Battery type:
2 pcs. Alkaline 1.5 V AA - Cargo 200739.
• Size:
3.36 x 7.82 x 15.8 cm. (1.32 x 3.08 x 6.22 inches).
• Weight:
290 gr. (10 oz.)
• Safety standards:
UL / EMC/LVD.
The Digital multimeter is up to the standards of IEC1010 Pollution
Degree 2, Overvoltage Category III. Rated 600 V AC CAT III,
Rated 1000 V. DC CAT II.
• Accuracy is ± (% of r number in last digit) at 23 ± 5°C, <75% RH.
• Temperature coefficient: 0.1 % / °C.
GB
Automatic Selection page 34 . Just one key selects the measurement function page 35
