HBX THM-0300, Installation Manual, Page: 6 / 16

© 2015 HBX Controls 4
1) TYPE HEAT ONLY
2) VIEW ALL YES
3) VIEW AUTO YES
4) SETBACK YES
5) ROOM OFFSET 0
°
F
6) C OR F
°F
SPECIAL FUNCTIONS
View Auto
This feature allow you automatic changeover or
manual changeover. Changeover refers to the
thermostat being switched from heat to cool as the
air crosses a certain temperature. Auto changeover
switches from heat to cool automatically while
manual changeover thermostats must be changed
by hand. If you select “NO”, changeover is not going
to appear in the Adjustment screen.
Applicable to: Heat/Cool, 2Heat/Cool and 2Cool/Heat modes.
1) TYPE HEAT ONLY
2) VIEW ALL YES
3) VIEW AUTO YES
4) SETBACK YES
5) ROOM OFFSET 0
°
F
6) C OR F
°F
SPECIAL FUNCTIONS
Setback
Allows you to program a setback. A setback can
be programmed to maximize energy during time
frames where the zone may be vacant. When you
select “YES” you can program up to 4 setback time
period.
1) TYPE HEAT ONLY
2) VIEW ALL YES
3) VIEW AUTO YES
4) SETBACK YES
5) ROOM OFFSET 0
°
F
6) C OR F
°F
SPECIAL FUNCTIONS
Offset
This feature allows you to program an offset. In the
case that the thermostat is not reading the same
temperature as the actual temperature in the
room. This setting allows the used to offset the
temperature showing on the thermostat.
1) TYPE HEAT ONLY
2) VIEW ALL YES
3) VIEW AUTO YES
4) SETBACK YES
5) ROOM OFFSET 0
°
F
6) C OR F
°F
SPECIAL FUNCTIONS
Celsius or Fahrenheit
Change the values in the thermostat to display
either the Celsius or Fahrenheit scale.
eg. Actual Room Temperature 72 °
Thermostat Shows 73 °
The user can put an offset of -1 ° to get the tempratures to match.