HBX THM-0300, Installation Manual, Page: 11 / 16

9
Zone Setup: Sequence
This option allows the user to set the zone module
sequence order. Select the sequence you would
like to set up for the module (1-4, 5-8, 9-12,13-16,
17-20). Adjusting the sequence order can only be
done using the first THM-0300 (zone 1) thermostat
that is connected to the zone module.
Selecting sequence order (1-4) will set the
zone module as the “master”.
ZONE SETUP
1) SEQUENCE 1 - 4
2) DEMAND LOW
3) PRIORITY NONE
4) PASSWORD AB12
5) MASTER ID:A2
Zone Setup: Demand
This option allows the user to determine what
happens when the thermostat makes a call.
Low - Low Temperature Demand
High - High Temperature Demand
DHW - Domestic Hot Water (Digital Aquastat)
Fan - Fancoil Demand
ZONE SETUP
1) SEQUENCE 1 - 4
2) DEMAND LOW
3) PRIORITY NONE
4) PASSWORD AB12
5) MASTER ID:A2
Zone Setup: Priority
This option allows the user to set a priority on a
zone(s) over other zone(s). Priorities range from 1
(highest) to 8 (lowest). Higher priorities will lock out
lower priorities until the demand has been satisfied.
Multiple zones can be given the same numbered
priority.
Priority 1 is a timed priority of 60 minutes,
generally used for DHW.
ZONE SETUP
1) SEQUENCE 1 - 4
2) DEMAND LOW
3) PRIORITY NONE
4) PASSWORD AB12
5) MASTER ID:A2
Zone Setup: Password
This option allows the user to see or change the
password to connect to the Zoning App.
ZONE SETUP
1) SEQUENCE 1 - 4
2) DEMAND LOW
3) PRIORITY NONE
4) PASSWORD AB12
5) MASTER ID:A2
Zone Setup: Master ID
With this option, if the thermostat is connected to
the first zone module it will display the master ID.
If selected it will put the module into “Discovery
mode”. If the thermostat is connected to
additional zone modules, it will indicate the ID of
the master module it is paired to. If selected it will
put the module into pairing mode.
ZONE SETUP
1) SEQUENCE 1 - 4
2) DEMAND LOW
3) PRIORITY NONE
4) PASSWORD AB12
5) MASTER ID:A2