© 2014 HBX Controls
2
PROGRAMMING THM-0100
N
AVIGATING
THE
T
HERMOSTAT
All programming steps within the thermostat
are achieved by using the three buttons (and
combinations thereof) located on the right-hand
side of the thermostat.
The
+
button is used to scroll up in menu screens and increase a
7
The
-
button is used to scroll down in menu screens and decrease
7
Pressing the
+
or
-
button on their own for 2 seconds
while viewing the main
“Status Screen”
will allow you
to quickly adjust your target temperature. Once you
have reached the desired target temperature by
using the
+
and
-
return the thermostat to the initial
“Status Screen”
mode.
SETTING THE THERMOSTAT
Special Functions
Enter the
“Special Functions”
screen by holding down the
+
and
-
buttons
simultaneously for 5 seconds (from the
“Status Screen”
). To select the desired
option, use the
+
and
-
buttons to toggle and the
set
button to select.
1) Type
- Select between Heating, Cooling, and Setpoint modes.
Heat Function
Select the “Heat Function” for applications using a
single heating source.
See diagram 1 for wiring examples.
1) TYPE
HEAT
2) VIEW ALL
YES
SPECIAL FUNCTIONS
Cool Function
Select the “Cool Function” for applications using a
single cooling source.
See diagram 2 for wiring example.
1) TYPE
COOL
2) VIEW ALL
YES
SPECIAL FUNCTIONS
Setpoint Function
Select the “Setpoint Function” for applications using
pumps, fancoils and other equipment.
See diagram 3 for wiring example.
1) TYPE
SETPNT
2) VIEW ALL
YES
SPECIAL FUNCTIONS
72.0
°F
10:00
am
MON
SET TARGET
FLOOR
79°F
TARGET
72°F
HEAT
