39
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
Declaration of Incorporation of partly completed Machinery
Declaration of Incorporation of partly completed Machinery
to Directive 2006/42/EC, Annex II 1 B
(Original Declaration of Incorporation)
Herewith the manufacturer
HBS Bolzenschweiss-Systeme GmbH & Co. KG
Felix-Wankel-Strasse 18
P.O. Box 13 46
85221 Dachau
GERMANY
Phone +49 8131 511-0
Fax
+49 8131 511-100
declares for the following product
Machine information: Stud welding gun
Type:
A 22
Order No:
93-20-290C
Serial No:
93-20-290C/212XXXX
Year of manufacture: 2021
that the following essential requirements of the above mentioned Directive – including chan
-
ges to the Directive to be applied at the moment of this declaration – were applied and fulfilled:
Annex I, Article 1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.1.7, 1.2.1, 1.2.2, 1.2.3, 1.2.4.1, 1.2.6,
1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2.1, 1.5.1, 1.5.2, 1.5.4, 1.5.5,
1.5.6, 1.5.8, 1.5.10, 1.5.11, 1.5.15, 1.5.16, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1.1, 1.7.2,
1.7.3, 1.7.4,
that special technical documentation was compiled in accordance with Part B of Annex VII of
the above mentioned regulation and will be transmitted, in response to a reasoned request by
the national authorities as follows:
The above mentioned documents will be transmitted by e-mail as a data file in
German language.
that this partly completed machinery must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of the
Directive, where appropriate.
that this incomplete machine complies with corresponding regulations of the following additi-
onal EU Directives, including any changes to be applied at the moment of this declaration:
„Electromagnetic compatibility“ 2014/30/EU
Protection targets of the low voltage regulation were kept to appendix I, no. 1.5.1 of the
machine regulation.
Persons who are based in the European community and who are authorised to compile the
technical documentation:
Name:
Heike Otto
Address: see manufacturer
Dachau, 04.01.2021
Gregor Gröger (CEO HBS)
Place of issue, Date
Summary of Contents for 93-20-290C
Page 43: ......
