19
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
8 Design and Function
8
Design and Function
5
4
1
2
3
The body of the welding gun consists of a sturdy two-part
plastic housing (1)
.
The
control cable and the
solenoid cable (2)
are connected through the welding
gun handle to the welding gun. The
welding cable (3)
is externally connected.
Positioned at the front of the welding gun there is the chuck where the welding ele-
ments of the welding gun are manually fed.
A leg assembly with foot piece, where the ceramic ferrule grip is inserted, is used to
position the welding gun vertically.
The springy welding elements are projecting out of the ceramic ferrule grip with
ceramic ferrule. In this way, they can be positioned above the aluminum ball or the
cone.
At the front of the welding gun handle, the
welding gun trigger (4)
is installed. It is
used to trigger the welding process.
The
serial number (5)
is stamped on the welding gun handle.
The
protection cap (6)
is used to cover the damper.
Type plate
The type plate contains the following information:
– Manufacturer
– Type
Summary of Contents for 93-20-290C
Page 43: ......