WE2107
34
A2087-1.3 en/de
HBM
9.4
Mounting on a stand, WE2107
Opening for cables
55
86
Take the following steps to mount the device:
1. Remove the mounting base from the back of the device by loosening the
two bolts.
2. Attach the mounting base to the stand plate with the four M4 bolts.
3. Run the cables through the PG glands and connect them to the electronics.
4. Close the two halves of the housing and join them together with the two
bolts. Pull the cables a little way out of the PG glands.
5. Attach the closed housing to the mounting plate with the two bolts.
If applicable, run the cables into the conduit inside the stand.
