HBM P2VA1, Mounting Instructions

Page: 16 / 44

P2VA1, P2VA2
16
A1564-5.5 en/de HBM
Example:
The TEDS content of sensor P2VA1/500 bar with ident. no. 081310277, man­
ufactured in August 2004
TEDS
Manufacturer HBM
Model P2V (voltage output)
Version letter
Version number 8
Serial number 1310277
Template: High Level Voltage Output sensor
Transducer Electrical Signal Type Voltage Sensor
Minimum Pressure 0.000 Pa
Maximum Pressure 50.000M Pa
Minimum Electrical Value 500.00000m V
Maximum Electrical Value 10.00000 V
Mapping Method Linear
AC or DC Coupling DC
Output Impedance of the Sensor 10.00k Ohm
Transducer Response Time 1.0000000u sec
Excitation Level (Nominal) 24.0 V
Excitation Level (Minimum) 15.0 V
Excitation Level (Maximum) 30.0 V
Excitation Voltage Type DC
Maximum current draw at nominal excita­
tion level 25.12m A
Calibration Date 3-Aug-2004
Calibration Initials HBM
Calibration Period (Days) 0 days
Measurement location ID 0
Template: HBM Channel name
Channel name P2VA1 / 500 bar
5 Measuring dynamic pressures
During dynamic loading, the maximum pressures should not be greater than
the nominal pressure.
The transducers are designed for these loads, but the actual conditions from
the operating load and the typical spread require safety measures against the
transducer bursting.
Calibration related to static pressures is also applicable when measuring
dynamic pressures.