5
P2VA1, P2VA2
A1564-5.5 en/de
HBM
times. There must be reference to the remaining dangers associated with
pressure measurement technology.
Although the P2V is designed for maximum safety, safety engineering regula
tions demand that burst protection is implemented around the transducer.
The transducer must be protected against mechanical loads or knocks.
The resistance of the steel of the measuring body only applies if temperatures
are never allowed to fall below or rise above the limits specified in the data
sheet.
If these temperature limits are exceeded, in the event of fire, for example, the
transducer will be unusable.
A significant change in the zero signal shows that the device has come to the
end of its service life.
Remaining dangers are indicated in this operating manual by the following
symbols:
Symbol:
DANGER
Meaning:
Maximum danger level
Warns of an
imminently
dangerous situation in which failure to comply with
safety requirements
will
result in death or serious physical injury.
Symbol:
WARNING
Meaning:
Potentially dangerous situation
Warns of a
potentially
dangerous situation in which failure to comply with
safety requirements
can
result in death or serious physical injury.
Symbol:
CAUTION
Meaning:
Potentially dangerous situation
Warns of a
potentially
dangerous situation in which failure to comply with
safety requirements
could
lead to damage to property, slight or moderate
physical injury.
Summary of Contents for P2VA1
Page 2: ...English Page 3 21 Deutsch Seite 23 41...
Page 22: ...P2VA1 P2VA2 22 A1564 5 5 en de HBM...
Page 42: ...P2VA1 P2VA2 42 A1564 5 5 en de HBM...
Page 43: ......