Sensor Installation
22
A4263-3.5
HBM: public
FS64
After ensuring that the sensor is in its vertical position,
fasten the hexagon nuts (
) with a torque of
5 Nm.
Important
Care must be taken to avoid rotating the sensor while
fastening the nuts.
2.2.5
Protecting the Sensor
If the sensor is to be placed outdoors, it should be
installed inside a box with a proper IP. This box will pro
tect the sensor from moisture, sun and the influence of
the shades on the measurement. Despite being a ther
mally compensated sensor, the measurement can be
affected if the sensor is, for example, subjected to sun
light and shade at the same time. Note that some protec
tion boxes may require their installation on the wall previ
ous to the sensors.
Fig. 2.13