HBK U9C, Mounting Instructions

Page: 10 / 144

U9C
SCOPE OF SUPPLY, ACCESSORIES AND VARIANTS
8
3 SCOPE OF SUPPLY, ACCESSORIES AND VARIANTS
Scope of supply
S
U9C force transducer
S
U9C mounting instructions
S
Test report
Accessories
Description Ordering number
KAB168-5, PUR connection cable with M12 8-pin socket, 5 m long,
free ends on opposite side. For connecting the amplifier module to
the downstream electronics 1-KAB168-5
KAB168-20, PUR connection cable with M12 8-pin socket, 20 m
long, free ends on opposite side. For connecting the amplifier mod­
ule to the downstream electronics 1-KAB168-20
Thrust piece EDO9/20kN; suitable for nominal (rated) forces from
0.5 kN … 20 kN 1-EDO9/20kN
Thrust piece EDO9/50kN; suitable for nominal (rated) force 50 kN 1-EDO9/50kN
Equipment variants
All force transducers are available in different versions. The following options are avail­
able:
1. Cable
The U9C is equipped with a cable 1.5m long in the standard version. You can also or­
der the force transducer with the following cable lengths:
- 3 m
- 5 m
- 6 m
- 7 m
- 12 m
2. Device plug/electrical connection
We can mount one of the following connectors on the U9C if requested:
- D-SUB connector, 15-pin: 15-pin connector for connection to numerous amplifier
systems, e.g. MGCplus, Scout, MP85, etc.
- D-SUB HD connector: A 15-pin plug for connection to appropriate amplifier systems,
e.g. the HBM QuantumX system