HBK TIM-PN, Mounting Instructions

Page: 56 / 264

TIM-PN
SETTINGS
54
Max. speed [rpm] Taken over by the transducer
With manual selection: 1-50000
If the maximum speed is exceeded by 5%, an error
flag is set in the fieldbus.
Type Taken over by the transducer
With manual selection: Quadrature ; Basic
Zero index Taken over by the transducer
With manual selection: Yes/No
Angle of rotation resolution 1x; 2x; 4x
(4x is only available when type = Quadrature)
Reset angle with PROFINET; Manual; Zero index
Max. angle [degree] 360; 720; Max**
Angle offset [degree] 0
… ±
Max. angle**
Angle interpolation On/Off
Glitch filter Off, 82ns, 1
μ
s, 10
μ
s, 100
μ
s
Save
Max. rpm
If this value is exceeded by 5%, an error flag is set in the fieldbus.
Type
If the speed signal is output by a quadrature transducer (connections A+F1/A-F1, 90
°
shifted A+F2/A-F2), this can be set here. In this case, the direction of rotation is also
derived from this signal.
If a transducer with just one track is connected, it must be connected to A+F1/A-F1 and
no direction of rotation will be available.
Notice
Only external encoders with standard 5V as per the RS422 standard may be connected.
Angle resolution
S
1x - The F1 leading edges are evaluated
S
2x - The F1 leading and trailing edges are evaluated
S
4x - The F1 and F2 leading and trailing edges are evaluated