HB-THERM M8146-EN, Assembly Instructions Manual

Page: 15 / 16

Assembly Instructions M8146-EN
M8146-EN 2019-07
15/16
Fig. 29: Visual control of the groove
alignment
WARNING!
Improper installation can cause material
damage!
Wrongly mounted multiphase motors can lead to
dysfunction and/or material damage.
Therefore:
– Observe correct mounting, visual control to
check the engagement of the piston rod in the
coupling

Fig. 29.
Fig. 30: Assemble the switching unit
buffer (19)

Connect the cable connector of the multiphase motor (M 5.6).

Engage the switching buffer unit (19) on the side.

Mount the switching buffer unit (19) with 2x pipe couplings
(label 8) as well as 2x screws (label 9) on the base plate.

Mount the protection cover of the accumulator with two screws
(label 10).
on the multiphase motor, the buffer module (M 7)
Fig. 31: Disassemble the multiphase
motor M 7
4. Proceed as follows to disassemble the multiphase
motor (M 7):

Withdraw the cable connector of the multiphase motor (M 7).

Loosen 2x fixing screws (label 1) of the multiphase
motor (M 7).

Turn the multiphase motor (M 7), slightly pull out downwards
and move out of connection.
5. Proceed as follows to mount the multiphase motor (M 7):

Engage the multiphase motor, turn into final position and fix
with the two screws.

Connect cable plug of the multiphase motor.
6. Carry out inspection (

page 16).
7
8
10 9
1