Assembly Instructions M8146-EN
M8146-EN 2019-07
9/16
Fig. 14: Mount the multiphase motor M 5,6
Fig. 15: Visual control of the groove
alignment
WARNING!
Improper installation can cause material
damage!
Wrongly mounted multiphase motors can lead to
dysfunction and/or material damage.
Therefore:
– Observe correct mounting, visual control to
check the engagement of the piston rod in the
coupling
Fig. 15
Fig. 16: Assemble the switching unit
buffer (19)
Connect the cable connector of the multiphase motor (M 5.6).
Engage the switching buffer unit (19) on the side.
Mount the switching buffer unit (19) with 2x pipe couplings
(label 8) as well as 2x screws (label 9) on the base plate.
Mount the protection cover of the accumulator with two screws
(label 10).
7
8
10
9
