14
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
^
hazet.com •
]
• Always keep the grips dry, clean and free
of grease or oil.
• Make sure that the working area is clean,
well ventilated and always well lit.
• Never use the tool whilst under the influ-
ence of alcohol or drugs.
• Repair work must be carried out exclu-
sively by authorized persons.
• Labels on the tool must always be kept
legible. The user is responsible for ensur-
ing that the sticker stating warning signs,
rotation speed, the serial no. and the
article no. is not damaged and is easy
to read.
• Never use quick-release couplings direct-
ly on the tool. There must be an air hose
of at least 20 cm in length between the
tool and the quick-release coupling.
• Only replace tools when the air hose
is disconnected. Before lubricating or
changing the tools, always disconnect
the machine from the compressed air
supply.
2
For your safety
• Do not use the tool in an explosive atmos-
phere.
Pneumatic tools can produce sparks
that may ignite combustible materials. Never
operate tools in proximity to combustible
substances like petrol, naphtha or deter-
gents, etc. Work in well-cleaned and well-
ventilated areas only. Keep combustible
materials out of the work area. Never use
oxygen, carbon dioxide or other bottled
gases to power pneumatic tools.
• Do not point the device at another per-
son.
Keep children and other persons out of
the work area when operating the tool.
• Do not operate the device in an idle state.
• Do not allow pneumatic tools to come
into contact with sources of electricity.
• Pay attention to the working pressure.
For max. air pressure see table on page 15
.
Exceeding the approved maximum pressure
of tools and accessories may cause explo-
sions and may result in severe injuries. The
maximum pressure of the compressed air
must be equal to or less than the approved
pressure load indicated for the tool.
• Check the tight fit of the hose connection.
Do not use defective pressure hoses.
Uncontrollably moving pressure hoses may
cause severe injuries.
• Only disconnect pneumatic tools when
they are not pressurised.
Uncontrollably
moving pressure hoses may cause severe
injuries.
• Use clean and dry air only.
Never use oxy-
gen, carbon dioxide or other bottled gases
to power pneumatic tools.
• Only use spare parts, attachments and
accessories which are recommended by
the manufacturer.
• Never carry the tool by the compressed
air hose.
• Never carry the connected tool with a
finger on the operating lever.
• Avoid unintentional actuation.
