16
Please secure separate parts against falling off!
Tools must not tilt!
3
Design and function
3.3 Application
Removal:
• Install a compression nut and a washer onto the threaded
spindle.
• Select a thrust block suitable for the external diameter of the
slotted-cylinder silent block and guide this onto the spindle with
the open side facing the slotted-cylinder silent block.
Attention:
The thrust block must be selected so that this
presses onto the metal sheath of the silent block.
• Insert this unit into the slotted-cylinder silent block.
• From the opposite side, guide a suitable socket sleeve with a
step plate onto the threaded spindle.
Attention:
Ensure that you select the socket sleeve so
that the slotted-cylinder silent block is well received and
that the socket sleeve has enough surface to support
itself.
Note:
Ensure that you have an unobstructed view of the
viewing window in order to monitor the extraction.
• Screw on the spindle nut with washer until a frictional connection
is made.
• If all tools are optimally aligned, operate the compression nut
while counterholding the spindle nut until the slotted-cylinder
silent block is completely exposed.
• Loosen tools and remove the dismounted slotted-cylinder silent
block from the socket sleeve.
• After removal, remove the operating tools.
• Defective slotted-cylinder silent block
Summary of Contents for 4937-2/32
Page 27: ...27 Notizen Notes ...