12
Please secure separate parts against falling off!
Tools must not tilt!
1. Owner's liability
• The tool was developed and manufactured accor-
ding to the technical norms and standards valid
at the time and is considered to be operationally
reliable. Nevertheless, the tool may present a
danger when it is not used as intended or used in
an inappropriate way by non-qualified personnel.
Please make sure that any person using this device
or carrying out any maintenance work carefully
reads these operating instructions and fully under-
stands all the provided information before using the
device.
• Keep the operating instructions together with the
device at all times.
• Any modification of the tool is strictly forbidden.
• All security advices, warning and operation notices
on the tool have to be kept legible. Immediately
replace any damaged labels or stickers.
• All specified set values or ranges must be observed.
• These instructions are provided as a guide only.
Always make sure that you have a copy of the
appropriate vehicle manufacturer's service instruc-
tions, or another appropriate manual that provides
the correct information needed to correctly execute
the work.
2. Intended use
Operational reliability is only guaranteed
if the tool is used as intended in
accordance with the information in the
operating instructions.
In addition to the safety advice given in these ope-
rating instructions, the general safety regulations,
regulations for the prevention of accidents and regula-
tions for environmental protection valid for this tool's
application range must be observed and respected.
Always ensure tools are used, inspected and
maintained in compliance with the respective local,
state, national or federal regulations.
• The tool must only be used if it is in good working
condition.
• All safety equipment must always be within reach
and should be checked regularly.
• The HAZET slotted-cylinder silent block tools are
for inserting and removing slotted silent blocks,
e.g. on the following vehicles:
MERCEDES-BENZ
Actros 1, 2, 3
model year 2002
→
– Stabiliser bearings
x
70 mm:
MAN
TGA, TGS, TGX – Shock absor-
ber bearings
x
68 mm:
MAN
(front spring) ROR, SAF – Shock
absorber bearings
x
66 mm:
IVECO
Eurostar – Cab
x
65 mm:
MERCEDES-BENZ
Actros 1 ∙ Atego 1
∙ Axor 1, 2, 3 ∙ Econic 1 – Stabiliser bearings
x
63 mm:
DAF
x
60 mm:
MAN
TAG, TGS, TGX –
Leaf spring bearing VA, HA ∙ MERCEDES-BENZ
Actros, Axor – Leaf spring lug ∙ IVECO Eurostar
– Leaf spring lug ∙ RENAULT Kerax, Magnum,
Premium – Leaf spring lug
x
58 mm:
MERCEDES-BENZ
3229 B, 652, 650 ∙
Volvo
x
56 mm:
IVECO
Eurostar – Cab
• Please refer to the table on page 14 for further items
which you will require in order to operate this tool.
• Any deviation from the intended use and/or any
misapplication of the device is not allowed and will
be considered as improper use.
• Any claims against the manufacturer and/or its
authorised agents because of damage caused by
improper use of the tool are void.
• Any personal injury or material losses caused by
improper use of the tool are the sole responsibility
of the owner.
2
For your safety
Summary of Contents for 4937-2/32
Page 27: ...27 Notizen Notes ...
