1979 N-81 BA-
I
07.2018/Ho/
∞
114
2
For Your Safety
Never look straight into the light.
The light intensity is strong enough to cause eye injuries.
Warning
Electrical energy can cause serious injuries.
In order to avoid electrical shock, injuries or fi re the
following safety instructions have to be observed and
respected:
• Please make sure that lead and housing are not dam-
aged. Lights and charging stations that have been
dropped or that are damaged, must be checked by quali-
fi ed personnel before restarting operation.
• When laying the power supply lead, please make sure
that it does not come into contact with hot or sharp parts
and that it cannot be damaged in another way. The lead
is to be laid in such a way that it does not constitute a
risk of stumbling.
• The LED lamp must not be exposed to water or other
liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by quali-
fi ed technical personnel only. In order to ensure the work-
ing reliability in the long term, always use original spare
parts.
• The LED lamp must not be disassembled. Inappropriate
assembly can lead to a reduction of the functionality, to fi
re, to electrical shocks and/or to injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is
strong enough to cause eye injuries.
• If an extension cord is necessary, it must be suffi ciently
dimensioned for the charging station.
Cables which are not appropriate for the necessary
amperage may overheat.
• When recharging, the LED lamp slightly warm up which
does not reduce their functionality. When working with
the work light, appropriate caution is required.
• Only use the LED lamp within the prescribed places, and
governed under the current regulations relating to the
working environment and to electrical systems.
• Avoid eye injuries - Never look directly into the beam of
light or shine it into other people's faces. If this occurs
for too long, the blue light portion of the beam can cause
retinal damage. If the light beam shines into the eyes,
close the eyes and turn the head away from the light
beam.
• This lamp exceeds the conditions for risk-free use. The
risk when using it depends on how the user handles the
lamp.
(1) This value indicates the factor by which the risk group
limit value to the next lowest group has been exceeded.
The limit value is 1.
(2) Distance from eyes to the lamp at which the respective
risk group is applicable.
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.
Warranty
Any deviation from the intended use is not allowed and will
be considered as improper use. Improper use means:
• Products that have been modifi ed or repaired by persons
not belonging to HAZET.
• Misuse, improper handling, negligence and any deviation
from the intended use or from the instructions and speci-
fi cations of HAZET or
• Use in combination with any other product, device,
component or system that is damaged, may cause
malfunction or is not intended for use in combination
with this tool.
EC Declaration of Conformity
The manufacturer:
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstraße 25-29
42857 Remscheid – GERMANY
confi rms hereby under sole responsibility
that the following products:
Brand: HAZET
Product description: LED-Lamp
Model No.: 1979 N-81
We declare that the above designated product is in compli-
ance with the following European Community
Directives 2011/65/EG (RoHS II), EMV 2014/30/EG.
Furthermore we declare that the product is in
compliance with the following standards:
DIN EN 55015:2016-04
DIN EN 50581:2013-02
Person authorized to compile the technical fi le:
Sandra Müller, Tel.: +49 (0) 2191 792 319
Signature o f the manufacturer:
Guido Schmidt
Remscheid, July 23th, 2018
Technical details are kept in quality department of
HAZET Remscheid, GERMANY
CE marking affi xed date: July 23th, 2018
Risk group 2
NOTE!
Hazardous optical radiation may be emitted by
this product. When operating, do not look into the lamp
for an extended period of time. Can be hazardous to
the eyes.
Exposure Hazard Value (EHV)(1)6
Risk group
Hazard Distance (HD)(2)
2
0 m - 0.49 m
1
0.49 m - 4.90 m
Freie Gruppe
> 4.90 m
HAZET-WERK
Hermann Zerver GmbH & Co. KG
•
;
Güldenwerther Bahnhofstraße 25 - 29
•
42857 Remscheid
[
+49 (0) 21 91 / 7 92-0
•
\
+49 (0) 21 91 / 7 92-375
•
^
hazet.de
•
]
1979 N-81 BA-
I
07.2018/Ho/
∞
114
2
For Your Safety
Never look straight into the light.
The light intensity is strong enough to cause eye injuries.
Warning
Electrical energy can cause serious injuries.
In order to avoid electrical shock, injuries or fi re the
following safety instructions have to be observed and
respected:
• Please make sure that lead and housing are not dam-
aged. Lights and charging stations that have been
dropped or that are damaged, must be checked by quali-
fi ed personnel before restarting operation.
• When laying the power supply lead, please make sure
that it does not come into contact with hot or sharp parts
and that it cannot be damaged in another way. The lead
is to be laid in such a way that it does not constitute a
risk of stumbling.
• The LED lamp must not be exposed to water or other
liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by quali-
fi ed technical personnel only. In order to ensure the work-
ing reliability in the long term, always use original spare
parts.
• The LED lamp must not be disassembled. Inappropriate
assembly can lead to a reduction of the functionality, to fi
re, to electrical shocks and/or to injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is
strong enough to cause eye injuries.
• If an extension cord is necessary, it must be suffi ciently
dimensioned for the charging station.
Cables which are not appropriate for the necessary
amperage may overheat.
• When recharging, the LED lamp slightly warm up which
does not reduce their functionality. When working with
the work light, appropriate caution is required.
• Only use the LED lamp within the prescribed places, and
governed under the current regulations relating to the
working environment and to electrical systems.
• Avoid eye injuries - Never look directly into the beam of
light or shine it into other people's faces. If this occurs
for too long, the blue light portion of the beam can cause
retinal damage. If the light beam shines into the eyes,
close the eyes and turn the head away from the light
beam.
• This lamp exceeds the conditions for risk-free use. The
risk when using it depends on how the user handles the
lamp.
(1) This value indicates the factor by which the risk group
limit value to the next lowest group has been exceeded.
The limit value is 1.
(2) Distance from eyes to the lamp at which the respective
risk group is applicable.
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.
Warranty
Any deviation from the intended use is not allowed and will
be considered as improper use. Improper use means:
• Products that have been modifi ed or repaired by persons
not belonging to HAZET.
• Misuse, improper handling, negligence and any deviation
from the intended use or from the instructions and speci-
fi cations of HAZET or
• Use in combination with any other product, device,
component or system that is damaged, may cause
malfunction or is not intended for use in combination
with this tool.
EC Declaration of Conformity
The manufacturer:
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstraße 25-29
42857 Remscheid – GERMANY
confi rms hereby under sole responsibility
that the following products:
Brand: HAZET
Product description: LED-Lamp
Model No.: 1979 N-81
We declare that the above designated product is in compli-
ance with the following European Community
Directives 2011/65/EG (RoHS II), EMV 2014/30/EG.
Furthermore we declare that the product is in
compliance with the following standards:
DIN EN 55015:2016-04
DIN EN 50581:2013-02
Person authorized to compile the technical fi le:
Sandra Müller, Tel.: +49 (0) 2191 792 319
Signature o f the manufacturer:
Guido Schmidt
Remscheid, July 23th, 2018
Technical details are kept in quality department of
HAZET Remscheid, GERMANY
CE marking affi xed date: July 23th, 2018
Risk group 2
NOTE!
Hazardous optical radiation may be emitted by
this product. When operating, do not look into the lamp
for an extended period of time. Can be hazardous to
the eyes.
Exposure Hazard Value (EHV)(1)6
Risk group
Hazard Distance (HD)(2)
2
0 m - 0.49 m
1
0.49 m - 4.90 m
Freie Gruppe
> 4.90 m
HAZET-WERK
Hermann Zerver GmbH & Co. KG
HAZET-WERK
HAZET-WERK
•
;
Güldenwerther Bahnhofstraße 25 - 29
;
;
•
42857 Remscheid
[
+49 (0) 21 91 / 7 92-0
•
\
+49 (0) 21 91 / 7 92-375
•
^
hazet.de
^
^
•
]
]
]
