H A Z E T- W E R K
HÖCHSTE TECHNOLOGIE IN DER WERKZEUGFERTIGUNG SEIT 1868
HIGHEST TECHNOLOGY IN TOOL MANUFACTURE SINCE 1868
Instruction manual
Workshop lamp
FUNCTIONAL OVERVIEW
- Professional Working Lamp with the latest SMD LED Technology
- Robust plastic housing
- 360° rotatable, in eight steps, lockable lamp handle for a fl exible light alignment
- One extendable, 360° rotatable hooks on the front side of the housing
- An ultra-strong magnet on the front of the handle for fi xing onto metallic objects
- Additional belt clip
- Built-in Li-Ion battery pack (3.7 V / 1550 mAh)
- Rechargeable via AC-DC mains power supply (100 V-240 V) or DC car adapter (12 V-24 V)
- Charging capacity indication via dual-coloured LED on the back of the housing
TECHNICAL DETAILS
Illuminant: ______________________ 5x SMD LED
Input voltage: ___________________ 5V DC
Input current: ____________________ Max. 1000 mA
Rechargeable battery: ____________ Li-ion rechargeable battery
________________________________ pack 3.7 V | 1550 mAh | 5.73 Wh
Luminous fl ux: __________________ 100% 250 lm | 50% 105 lm
Battery life: _____________________ 100% 4 h | 50% 11 h
Charge time: ____________________ 4 h
Protection class: _________________ III
Storage temperature: _____________ -20 °C to 60 °C
Operating temperature: ___________ -20 °C to 25 °C
Weight of light incl. battery pack: __ 183 g
Dimensions of light: ______________ 131 x 66.5 x 29 mm
Length Micro USB cable: _________ 150 cm
OPERATION
The On/Off switch is positioned on the top of the case on the working lamp.
- One time push: switch on of the lamp with 100% light mode.
- Two times push: the mode for saving energy will be activated (50% light output).
- Three times push: the lamp will be switched off.
CHARGING PROCESS
The working lamp has to be fully charged before the fi rst use. Also charge the lamp fully, before putting it in storage for
longer period.
The following charging options are available:
- Via USB mains adapter from an AC mains socket
Connect the supplied USB/Micro USB charging cable to the USB mains adapter, by inserting the USB plug of the charging
cable in to the USB connector of the adapter. Then insert the Micro USB plug of the charging cable to the Micro-USB
connector on the back side of the working lamp. Before insertion, you will have to remove the rubber cap which protects the
USB Micro Plug.
- Via car DC adapter in the cigarette lighter socket of the car
Connect the USB/Micro USB charging cable with the Car Adapter, by inserting the USB plug of the charging cable into the
USB connector of the car DC adapter. Then insert the Micro USB Plug of the charging cable into the Micro USB connector
on the back side of the working lamp. (Remove rubber cap fi rst).
Charge indication by dual-coloured LED lights on the case back side, at the right beside the Micro USB connector.
- Battery is charging: LED lights red
- Battery fully charged: LED lights green
1979 N-81
q
H A Z E T- W E R K
HÖCHSTE TECHNOLOGIE IN DER WERKZEUGFERTIGUNG SEIT 1868
HIGHEST TECHNOLOGY IN TOOL MANUFACTURE SINCE 1868
Instruction manual
Workshop lamp
FUNCTIONAL OVERVIEW
- Professional Working Lamp with the latest SMD LED Technology
- Robust plastic housing
- 360° rotatable, in eight steps, lockable lamp handle for a fl exible light alignment
- One extendable, 360° rotatable hooks on the front side of the housing
- An ultra-strong magnet on the front of the handle for fi xing onto metallic objects
- Additional belt clip
- Built-in Li-Ion battery pack (3.7 V / 1550 mAh)
- Rechargeable via AC-DC mains power supply (100 V-240 V) or DC car adapter (12 V-24 V)
- Charging capacity indication via dual-coloured LED on the back of the housing
TECHNICAL DETAILS
Illuminant: ______________________ 5x SMD LED
Input voltage: ___________________ 5V DC
Input current: ____________________ Max. 1000 mA
Rechargeable battery: ____________ Li-ion rechargeable battery
________________________________ pack 3.7 V | 1550 mAh | 5.73 Wh
Li-ion rechargeable battery
Li-ion rechargeable battery
Luminous fl ux: __________________ 100% 250 lm | 50% 105 lm
Battery life: _____________________ 100% 4 h | 50% 11 h
Charge time: ____________________ 4 h
Protection class: _________________ III
Storage temperature: _____________ -20 °C to 60 °C
Operating temperature: ___________ -20 °C to 25 °C
Weight of light incl. battery pack: __ 183 g
Dimensions of light: ______________ 131 x 66.5 x 29 mm
Length Micro USB cable: _________ 150 cm
OPERATION
The On/Off switch is positioned on the top of the case on the working lamp.
- One time push: switch on of the lamp with 100% light mode.
- Two times push: the mode for saving energy will be activated (50% light output).
- Three times push: the lamp will be switched off.
CHARGING PROCESS
The working lamp has to be fully charged before the fi rst use. Also charge the lamp fully, before putting it in storage for
longer period.
The working lamp has to be fully charged before the fi rst use. Also charge the lamp fully, before putting it in storage for
The working lamp has to be fully charged before the fi rst use. Also charge the lamp fully, before putting it in storage for
The following charging options are available:
- Via USB mains adapter from an AC mains socket
Connect the supplied USB/Micro USB charging cable to the USB mains adapter, by inserting the USB plug of the charging
cable in to the USB connector of the adapter. Then insert the Micro USB plug of the charging cable to the Micro-USB
Connect the supplied USB/Micro USB charging cable to the USB mains adapter, by inserting the USB plug of the charging
Connect the supplied USB/Micro USB charging cable to the USB mains adapter, by inserting the USB plug of the charging
connector on the back side of the working lamp. Before insertion, you will have to remove the rubber cap which protects the
cable in to the USB connector of the adapter. Then insert the Micro USB plug of the charging cable to the Micro-USB
cable in to the USB connector of the adapter. Then insert the Micro USB plug of the charging cable to the Micro-USB
USB Micro Plug.
connector on the back side of the working lamp. Before insertion, you will have to remove the rubber cap which protects the
connector on the back side of the working lamp. Before insertion, you will have to remove the rubber cap which protects the
- Via car DC adapter in the cigarette lighter socket of the car
Connect the USB/Micro USB charging cable with the Car Adapter, by inserting the USB plug of the charging cable into the
USB connector of the car DC adapter. Then insert the Micro USB Plug of the charging cable into the Micro USB connector
Connect the USB/Micro USB charging cable with the Car Adapter, by inserting the USB plug of the charging cable into the
Connect the USB/Micro USB charging cable with the Car Adapter, by inserting the USB plug of the charging cable into the
on the back side of the working lamp. (Remove rubber cap fi rst).
USB connector of the car DC adapter. Then insert the Micro USB Plug of the charging cable into the Micro USB connector
USB connector of the car DC adapter. Then insert the Micro USB Plug of the charging cable into the Micro USB connector
Charge indication by dual-coloured LED lights on the case back side, at the right beside the Micro USB connector.
- Battery is charging: LED lights red
- Battery fully charged: LED lights green
1979 N-81
q
