background image

11

HAZET-WERK

 Hermann Zerver GmbH & Co. KG 

;

 Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY

[

 +49 (0) 21 91 / 7 92-0 • 

\

 +49 (0) 21 91 / 7 92-400 • 

^

 hazet.de • 

]

 [email protected]

3.  Dangers that may arise 

from the tool

Before each use, check the HAZET tool for 

full functionality. Do not use the tool set if its 

functionality cannot be ensured or if damage 

is detected. If the tool is used when it is not in 

full working order, you risk severe injuries to 

persons and damage to property.

•  Do not make any structural changes to the 

cable box. 

•  Never use tools with a defective on/off switch. 

Any tools that cannot be switched on or off with 

the On/Off switch are dangerous and must be 

repaired.

•  All service or repair work must be carried out 

by qualified personnel only. Only use original 

spare parts so as to guarantee its long-term 

operational safety.

•  Safety devices and/or cover parts may not be 

removed.

•  Never use the tool when a protective cover is 

missing or when not all of the safety devices are 

fitted and in perfect working order.

•  For safety reasons any modification of HAZET 

tools is strictly forbidden. Any modification of 

the tool will result in immediate exclusion from 

warranty and liability.

•  Keep the cable box away from heat sources.
•  The cable box must not be inserted or removed 

with wet hands.

•  To unplug from the socket, do not pull the cable, 

but always the plug!

•  Do not pull the cable over sharp edges or 

objects.

•  Place the cable box in a safe and dry place and 

check its stability.

•  Avoid mechanical strain.
•  Avoid running over the cable or other mechani-

cal strain on the cable and cable box!

•  Do not place the cable in water.
•  When working outdoors, make sure that only 

electrical devices that are approved for outdoor 

use are plugged in.

•  Operate the cable box only under the approved 

and suitable ambient conditions.

•  Do not work with the cable box in a potentially 

explosive environment.

•  Make sure that devices to be plugged in are 

switched to OFF beforehand.

•  Do not use the cable box if you are under the 

influence of medication, alcohol or drugs.

•  Do not cover the cable box. There is a risk of fire 

due to heat accumulation.

•  The cable box is not a toy. Keep it away from 

children.

•  Follow the instructions on the type plate. Do not 

remove the type plate

• 

Do not put them one behind the other!  
Do not operate covered!

2

 For your safety

Immer persönliche Schutzausrüstung tragen! 

Always wear personal protective equipment!

Summary of Contents for 161N-3D

















Reviews: