Classic² / Highpower²
In the Modbus submenu the menu fields are replaced. At the top left the address of
the device can be set. At the bottom left the baud rate of the communication is set
and at the bottom right the data width, parity and stop bits. The setting is done
analog to the main menu.
To exit the submenu, the menu item "exit" must be selected and confirmed with the
confirmation key.
In the appendix you will find the definitions of the registers that are necessary for
programming the PLC.
6.5 Operation via cable remote control (option)
When operating via the cable
remote, the XLR input (2)
must first be set to Remote
(see chapter Options).
After plugging in the cable
remote
control,
the
Classic²/Highpower²
automatically recognizes that
an analog cable remote control
has been plugged in. On the
cable remote control there is an on switch and a potentiometer for setting the pump
value.
11
