Classic² / Highpower²
8. Care and maintenance
Avoid running the Classic²/Highpower² without fluid. The pump will otherwise run dry.
Avoid overheating the device due to direct sunlight or direct spotlight. The permissible
ambient temperature can be found in the technical data.
Make sure that the ventilation slots of the machine are not clogged with dust deposits.
If necessary, the ventilation slots must be cleaned.
Wipe up leaked fluid immediately.
Check the suction strainer in the tank from time to time. Clean it or replace it.
If you use the same fluid canister frequently, you should rinse it thoroughly before
each filling with fresh fluid. This will prevent contamination.
The tank holder can be unscrewed for permanent installation. Please note: The
difference in height between the external canister and the machine must not exceed
1.5 meters, otherwise the pump will no longer be able to suck in the fluid)!
Clean the surface of the device, if necessary with a suitable, solvent-free cleaning
agent
Make sure that sufficient mist-free cooling air permanently surrounds the machine.
Otherwise, moisture damage could occur inside the machine.
PLEASE NOTE: The vaporizer of our fog machines does NOT need to be cleaned!
Cleaning liquids offered on the market can damage the vaporizer! The warranty will
be void in this case.
16
