Cord Inspection
SWIVEL CONNECTOR END
cord
direction
WH BR BLACK
BLUE GR YELLOW
Step 29:
Page 35
1. Make sure the cannon plug is connected. Power the unit on. Press the start button
until
Run
is displayed.
1.
2. Put one meter lead into the white port, and one meter lead into the black
port at the swivel
connector end where it connects to the swivel. 115 VAC should be present.
2.
Undo the power connection at the swivel. Remember to replace the o-ring and to use RTV #162
silicone rubber sealant when reconnecting the swivel connector end.
