Hayward HL2350020VSP Operation Manual Download

Page: 25 / 36

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Stopping a Theme

If a Favorite was created for the Theme, stop the Theme just as you would any other Favorite. To

stop a Theme within the “Manage Themes” screen, follow the procedure below. Note that when

stopping a Theme, all functions will turn off and the filter pump will return to any schedules that

have been previously set.

Config

The Config button offers many options related to the configuration and operation of the VS Omni.

You can view log files, backup configuration settings, restore configuration settings, modify display

settings and more.

Using a USB Thumb Drive

Some options require the use of a USB thumb drive (removable media) that will be inserted in the

VS Omni. If logging is desired (page 26), the thumb drive should be left in the VS Omni during

normal operation. This connection is not waterproof so care must be taken to protect the Control

MANAGE

themes

OFF

pool party

MANAGE

themes

OFF

pool party

favorites

heating

themes

air

71º F

config

favorites

heating

themes

air

71º F

config

SYSTEM

configuration

1 / 2

config wizard

system info

backup config

restore config

display

network

date/time

language

Summary of Contents for HL2350020VSP





































Search results

Summary of Contents for HL2350020VSP

Reviews:

Related manuals for HL2350020VSP

Brands by name

Popular brands

Hayward HL2350020VSP, Operation Manual

Search results

Summary of Contents for HL2350020VSP

Reviews:

Related manuals for HL2350020VSP

Brands by name

Popular brands