1. Press the Menu button until the Diagnostic screen appears.
This menu provides important information about the
performance of the pump that can be used during
troubleshooting. Below are the different screens and their
meaning. These are all real-time displays. Press
the ‘
>
’
button to view information.
Serial Number
03045433
Drive Rev: 1.13
Display Rev: 3.0.8
Input Voltage
Within Range
Motor Current
1.1A (0-13.0A)
Power Usage
225W (0-2650W)
Product Version
SP3400VSP
Driver: 78C
Heatsink: 67C
Com Bus
Online (addr: 1)
Displays firmware of
drive and display.
Also shows “too
high” or “too low”
Motor current;
range shown in ( )
Approximate Power usage;
range shown in ( )
Temperature of heatsink
and drive in Celsius.
Status of com link between
VSC and Hayward control.
Reads offline when not
connected
By pressing the + button you will see the last 20
error and or trip conditions, as well as the amount of
time that has elapsed since the condition occurred.
Event Log
Press + to View
Diagnostics Menu
Page 27
