background image

2

It allows the PC to emulate a hardware terminal. The layout of the local server depends

on the configuration of the pool controller hardware terminals. Figure 1 shows the local

server page for a Pro Logic PS-16:

Note that there is a two line text display (white background), menu navigation buttons

(to the right of the text display) and pool control buttons (below the text display). The

“Check System” LED is implemented as text just below the two line text display (when a

Check System situation exists).

ACCESSING THE LOCAL SERVER

The ACHN uses its unique Media Access Control (MAC) address to identify and

access its local server. The MAC address for each ACHN is located on the bottom of

each device.  The MAC is a string of the form 

00:23:62:00:wx:yz

 where “

wxyz

” repre-

sents a string of valid hexadecimal characters. To start the local server, type the ACHN’s

Uniform Resource Locator (URL) into your web browser’s address field. The local server’s

URL (i.e., logical name) is the string “

mypoolxyz

” where the “

xyz

” consists of the last

three digits of the ACHN’s MAC address. For instance the URL of the ACHN shown in

Figure 1 is “

mypool319

” because its MAC address ends in “

319

”. The last three digits

can contain alphanumeric values.  If the last three digits of your ACHN’s MAC are ABC,

the name used for your ACHN would be “mypoolabc”.  Do not enter a leading “www.”

or a trailing “.com” when accessing the local server. The name is not case sensitive: You

may use MYPOOLxyz, mypoolxyz, or even MyPoolxyz.

HOW THE BUTTON WORKS

The local server buttons are similar to the buttons on the Aqua Connect Remote Control

page, but not identical. In general, feedback from the pool controller is so fast that there

is no direct indication that a button has been pushed. Simply move the cursor over the

button and click the mouse to “depress” a button. Most buttons have a built in LED that

can be read per the following table; the color of the button determines the LED state.

Note that we have replaced the blinking LED on the hardware terminal by a third button

color on the local server page. Table 2 explains how to interpret the button colors.

Figure 1

The Company also may transfer such information (i) in connection with the sale, assignment or

other transfer of the business function of the Company to which the information relates, in which

case we will require any such buyer, assignee or transferee to agree to treat it in accordance

with this Privacy Policy; or (ii) in compliance with subpoenas or other valid court orders, in

response to inquiries and requests from regulatory authorities, in connection with the prevention

or detection of fraud, or as otherwise permitted or required by law.  In addition, we will make full

use of all information acquired through this Site and Service or otherwise that is not identifiable to

you.

Choices for Disclosure and Use of Information

You may choose to prevent the Company from disclosing or using your Personal Data and

Telemetry under certain circumstances. You may opt out of any disclosure or use of your

Personal Data or Telemetry for purposes that are incompatible with the purpose(s) for which it

was originally collected or for which you subsequently gave authorization.

Access and Correction

All of your Personal Data that is not Telemetry is accessible on the Site via your user account. You

may correct inaccuracies in that information at any time you are logged on. Most of the Telemetry

data stored on the servers is also accessible on the Site via your user account, but Telemetry

cannot be modified. Most Telemetry data can be downloaded from the Site by any login account

with access to the pool.

Security

The Company takes reasonable measures to safeguard your personal information and telemetry

data against unauthorized access, disclosure, copying, use or modification, whether or not in

electronic format. We use industry-standard technological precautions, such as Secure Socket

Layer technology

 

in an effort to protect your Personal Data and Telemetry data as it is transmitted

electronically from your computer to this Site and the Service and, furthermore, to protect it from

loss, misuse and unauthorized access, disclosure, alteration or destruction. Furthermore, the

Company requires that employees and third-party administrators / processors access your

Personal Data and Telemetry data only on a “need-to-know” basis.

You should keep in mind that no combination of security measures can ever provide guaranteed

protection all the time. We caution you that e-mail may be particularly vulnerable to unauthorized

interception, eavesdropping, modification and spoofing, and, therefore, you should take special

care in deciding what information you send to us via e-mail.  Moreover, where you use pass-

words, identification numbers or other special access features on this Site, it is your responsibil-

ity to safeguard them.

Enforcement

The Company has in place procedures for maintaining the confidentiality of Personal Data and

Telemetry data.  Any questions, concerns or complaints regarding this Privacy Policy or the

Company’s treatment of personal information or telemetry data may be communicated by contact-

ing us through this Site, sending an e-mail message to us at [email protected] or

by writing to us at Privacy Officer, Hayward Industries, 61 Whitecap Drive, North Kingstown, RI

02852.  When we receive a formal written complaint, our Privacy Officer will contact the author

within a reasonable period of time regarding his or her concerns and attempt to resolve these

concerns directly with this individual.

Links to Other Websites

This Site may contain links or references to third-party websites that are not affiliated with the

Company. The inclusion of any link does not imply the Company’s endorsement of any other

company, its websites, or its products and/or services.  Any such linked websites have separate

and independent privacy policies which we encourage you to read carefully.  Please be aware

that the Company has no control over linked third-party websites and, therefore, no responsibility

or liability for the manner in which the organizations that operate such websites may collect,

disclose, use or otherwise treat your personal information.

Other Terms

Your use of this Site is subject to our Terms of Use.

27

Summary of Contents for Aqua Connect

































Reviews: