Hayter Ranger 53 Pro 396D Owner'S Handbook Manual Download

Page: 5 / 44

1.3

CONTENTS

Page No

CONTENTS

INTRODUCTION.

WARRANTY.

SAFETY PRECAUTIONS.

Decals

SPECIFICATIONS.

ASSEMBLY INSTRUCTIONS.

General assembly.
Assembling the mower for the first time.

STARTING THE ENGINE.

Before starting the engine.
Starting the engine.

STOPPING THE ENGINE.

OPERATING THE MOWER.

Height of Cut.
Travel.
Turning the mower.
Mowing with grass collection.
Mowing without grass collection.
Heavy growth.
Moving the mower across non-grassed areas
Cutterbar operation.
Mowing and grass care tips.

MAINTENANCE.

Engine.
Grassbag.
Deck housing.
Securing nuts and bolts.
Lubrication.
Clutch cable adjustment.
Cutterbar.
Maintenance Schedule.

PREPARING THE MOWER FOR STORAGE.

FAULT FINDING.

DECLARATION OF CONFORMITY

396 PARTS LIST.

396 PARTS DIAGRAM.

ENGINE ANCILLARY PARTS

NOTES.

CUSTOMER INFORMATION.

1.4

1.5

1.6 - 1.9

1.9

1.10

1.11

1.11
1.12 - 1.14

1.15

1.15 - 1.16
1.16

1.18

1.19
1.20
1.20
1.21
1.22
1.22
1.22
1.23
1.23 - 1.24

1.25

1.25
1.25
1.25
1.26
1.26
1.26
1.27 - 1.28
1.29 - 1.30

1.31

1.32 - 1.33

1.34

2.1 - 2.4

2.5

2.6

2.7

2.8

111-0445(A) 21/10/05 10:26 am Page 1.3

Summary of Contents for Ranger 53 Pro 396D













































Search results

Summary of Contents for Ranger 53 Pro 396D

Reviews:

Related manuals for Ranger 53 Pro 396D

Brands by name

Popular brands

Hayter Ranger 53 Pro 396D, Owner'S Handbook Manual

Search results

Summary of Contents for Ranger 53 Pro 396D

Reviews:

Related manuals for Ranger 53 Pro 396D

Brands by name

Popular brands