Hayter Ranger 53 Pro 396D Owner'S Handbook Manual Download | Manualshive

Page: 10 / 44

background image

1.8

1.8

SAFETY PRECAUTIONS

Operation continued:

Start the engine carefully, with feet well away from the cutterbar.

Do not tilt the mower when starting the engine.

Do not put hands or feet near or under rotating parts.

Never pick up or carry a mower while the engine is running.

Stop the engine and disconnect the spark plug lead:

- Before clearing blockages or unclogging the discharge chute.

- Before cleaning/checking or working on the mower.

Stop the engine:

Do not lift the rear deflector whilst the mower is in operation.

- Whenever you leave the mower.

- Before refuelling.

- After striking a foreign object. Inspect the mower for damage and make repairs

before restarting and operating the mower.

- If the mower starts to vibrate abnormally ( check immediately ).

WARNING: THE CUTTERBAR CAN CONTINUE TO ROTATE
AFTER THE ENGINE IS SWITCHED OFF.

SAFETY PRECAUTIONS Continued.

111-0445(A) 21/10/05 10:26 am Page 1.8

«
...
8
9
10
11
12
...
»

Summary of Contents for Ranger 53 Pro 396D













































Reviews:

No comments

Related manuals for Ranger 53 Pro 396D

Brand: Yard Machines Pages: 8

EC Hydro Midsize

Brand: Ransomes Pages: 150

Brand: Yard-Man Pages: 36

Brand: Scag Power Equipment Pages: 24

Brand: Land Pride Pages: 62

Brand: Ariens Pages: 76

Landroid WR142E

Brand: Worx Pages: 104

Brand: IBEA Pages: 24

Brand: Wards Garden Mark Pages: 12

Flymo Micro Compact 300 Plus

Brand: Electrolux Pages: 12

Brand: MTD Pages: 32

Brand: Dixie Chopper Pages: 124

Z-Force S Commercial 60

Brand: Cub Cadet Pages: 40

Brand: Craftsman Pages: 24

Brand: Craftsman Pages: 24

Brand: Craftsman Pages: 24

Brand: Craftsman Pages: 28

Brand: Craftsman Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands