Hayter Powertrim 407D, Owner'S Handbook Manual

Page: 28 / 28

28
276798MA DRAFT COPY
How To Order Replacement Parts
Use only manufacturer’s authorised or approved replacement parts. The letter
placed on the end of the part number denotes the type of finish for the part, C for
chrome, Z for zinc, a PA for purchased assembly. It is important that you include
this when ordering a part. Do not use attachments or accessories not specifically
recommended for this unit. In order to obtain proper replacement parts you must
supply the model number of your machine (see serial number).
Replacement parts, except for the engine, transmission, transaxle or differential,
are available from your local Hayter authorised dealer, the store where the
mower was purchased or a service shop recommended by the store.
If you are unable to obtain parts or service in the manner outlined above, then
contact:
HAYTER LIMITED,
Service Department,
Spellbrook,
Bishop’s Stortford,
Hertfordshire. CM23 4BU
When ordering the following information is required:
(1) The Model Number
(2) Serial Number
(3) Part Number
(4) Quantity