background image

Back

7. Dog & Gun Switch/Training Selector Switch

• This activates the control for the Dog & Gun 
   transmitter. DG = Dog & Gun mode. 
   T= Training mode.

8. Customizing Mode Button

• This allows you to customize the system from 
   factory settings. Customization for different 
   key positions, stimulation levels, types of 
   stimulation, vibrate/tone, multiple dogs, and 
   bird launchers.

(See pages 19 through 22 for customizing your unit.)

9. Charging Jack

• Plug in charger to start charging.

NOTE: Charge transmitter & collar BEFORE FIRST USE.

Collar Receiver

The collar receives a signal from the Master Transmitter and delivers stimulation, tone or vibration for 
correcting or rewarding your dog. The collar is 100% waterproof.

On/Off Button

To 

turn on

, press firmly and release.  Press to turn on, two confirming tones will sound. Collar light will flash 

periodically.  Press to 

turn off

, and one long confirming tone will sound.  Collar light will stop flashing.

Dual-Purpose Collar Indicator Light

Indicates when the collar is on or off, indicates a received command from the transmitter, and serves as low 
battery indicator.

Contact Points

The contacts through which the collar receiver delivers stimulation.

7

Summary of Contents for DG/Hunter




































Reviews: