30
•
Plug in the new battery.
•
Close the case and put the screws back in.
To Replace the Dog & Gun Battery
The coin battery used for DG is 3V Lithium, 1620.
•
Remove the DG from the gun clip or gunstock by pushing a small screwdriver under the slot indicator
marks on the bezel.
•
To open the DG case, insert a fingernail into the slot between the top and bottom case.
•
Separate the top and bottom case.
•
Remove the board along with the rubber.
•
Remove the board from the rubber.
•
Remove the coin battery from the battery holder.
•
Taking note of the polarity, slide the new coin battery into the battery holder.
•
Insert the board into the rubber.
•
Insert the board and rubber back into the top case; make sure the battery clip in aligned to the latch.
•
Close the case. Make sure that it is aligned correctly.