Prepare the Devices
Charge the Master Transmitter
•
Lift the rubber cover protecting the Charging Jack.
•
Connect the Transmitter Charging Wire to the Master Transmitter.
•
Connect the AC adapter or car adapter to the Charging Cradle.
•
Plug the AC adapter into a 120V AC outlet, or plug the car charger into car power.
•
LED flashes red every 2 seconds.
•
The charging takes about 2 to 3 hours for the first charge.
•
LED stops flashing when the Master Transmitter is fully charged and will
automatically turn off when charging is complete.
•
Replace rubber cover.
Charge the collar receiver
•
Place the collar receiver in the Charging Cradle as shown.
•
Connect the AC adapter or car adapter to the Charging Cradle.
•
Plug the AC adapter into AC outlet, or car adapter into car power.
•
The collar LED flashes every 3 seconds during charging.
•
The charging takes about 2 to 3 hours for the first charge.
•
LED stops flashing when the receiver collar is fully charged.
10