64
Here are descriptions of every setup items:
Fragment Threshold(1): Set the Fragment threshold of wireless radio.
Do not modify default value if you don’t know what it is,
default value is 2346.
RTS Threshold(2):
Set the RTS threshold of wireless radio. Do not modify
default value if you don’t know what it is, default value is
2347.
Beacon Interval(3):
Set the beacon interval of wireless radio. Do not modify
default value if you don’t know what it is, default value is
100.
DTIM Period(4):
Set the DTIM period of wireless radio. Do not modify
default value if you don’t know what it is, default value is 3.
Data Rate(5):
Set the wireless data transfer rate to a certain value. Since
most of wireless devices will negotiate with each other and
pick a proper data transfer rate automatically, it’s not
necessary to change this value unless you know what will
happen after modification.
N Data Rate(6):
Same as above, but only for 802.11n clients.
Channel Width(7):
Set channel width of wireless radio. Do not modify default
value if you don’t know what it is, default setting is ‘Auto
20/40 MHz’.
Preamble Type(8):
Set the type of preamble, do not modify default value if you
don’t know what it is, default setting is ‘Short Preamble’.
Broadcast ESSID(9): Decide if the wireless router will broadcast its own ESSID or
not. You can hide the ESSID of your wireless router (set the
option to ‘Disable’), so only those people who know the
ESSID of your wireless router can get connected.
Summary of Contents for HWRN2
Page 1: ......
Page 9: ...CHAPTER IV APPENDIX 4 1 Hardware Specification 4 2 Troubleshooting 4 3 Glossary...
Page 24: ...15...
